Märklin digital 60996 Bedienungsanleitung Seite 31

CV
Explanation
22 PoM Functions FL, F9 - F15 when using multiple unit
Braking mode:
Bit 4 : DC voltage, polarity against the direction of travel
27 PoM
Bit 5 : DC voltage, polarity with the direction of travel
Bit 6 - 7 : always 0
RailCom ®
Bit 0: Channel 1 off/on
28
Bit 1: Channel 2 off/on
Bit 2: Automatic shutoff of Channel 1
Con guration:
Bit 0 : reverses direction properties of the locomotive
Bit 1 : speed level 14 or select 28/128
Bit 2 : turn analog operation off/on
29 PoM
Bit 3: RailCom ® inactive/active
Bit 4: always on
Bit 5 : select short / long address
31 PoM
Index high Byte
32 PoM Index low Byte
Alternative formats:
Bit 0 : Analog AC off = 0 / Analog AC on = 1
50 PoM Bit 1 : Analog DC off = 0 / Analog DC on = 1
Bit 2 : fx (MM) off = 0 / fx (MM) on = 1
Bit 3 : mfx off = 0 / mfx on = 1
Bit 0: Motor inverted 1= on, 0 off
Bit 1: Light inverted 1= on, 0 off
51 PoM Bit 2: Track inverted 1= on, 0 off
Bit 3: Aux 3 (1= logical, 0= ampli ed output)
Bit 4: Aux 4 (1= logical, 0= ampli ed output)
Values Default
Notes
0 = func. # only for locomotive address
0 – 255 0
1 = func. # also for multiple unit address
Bit 7-0 = [ F15 F14 F13 F12 F11 F10 F9 FL ]
Braking subject to direction:
- only Bit 4 : normal DC properties
48
0 / 16 - only Bit 5 : inverse DC properties
Braking not subject to direction:
0 / 32
- Bit 4 + 5 : 3 rail properties
0 / 1
0
0 / 2
0 / 4
The direction properties refer to the direction
0 / 1
of travel and the lights. The number of speed
0 / 2
levels and the light bit depend on the locomotive
6 (22)
0 / 4
controller.
0 / 8
Either the short main address or the long expan-
16
ded address as a locomotive address.
0 / 32
16 16 This is required for advanced settings, such as
0 0
CV 300 – 328.
0 / 1
Note:
15
0 / 2
DCC cannot deactivate itself.
0 / 4
0 / 8
0 / 1
0 / 2
The values of the required settings must be
0 / 4 0
added up.
0 / 8
0 / 16
31