Märklin digital 60996 Bedienungsanleitung Seite 28

CV Explanation
Alternative formats:
Bit 0: analog AC off = 0 / analog AC one = 1
50 Bit 1: analog DC off = 0 / analog DC on = 1
Bit 2: DCC off = 0 / DCC on = 1
Bit 3: mfx off = 0 / mfx on = 1
Bit 0: Motor inverted 1= on, 0 off
Bit 1: Light inverted 1= on, 0 off
51 Bit 2: Track inverted 1= on, 0 off
Bit 3: Aux 3 (1= logical, 0= ampli ed output)
Bit 4: Aux 4 (1= logical, 0= ampli ed output)
Motor type ... (Bit 0-4)
... Auxiliary function outputs 5 and 6
... Motor – Softdrive Sine
... Motor – without feedback control
52 ... Motor – High ef ciency propulsion C90
... Motor – Bell armature
... Motor – direct current DC soft
... Motor – direct current DC hard
... Motor – direct current DC 1 Gauge
Motor feedback control – feedback control
53
reference
Motor feedback control – feedback control
54
parameter K
Motor feedback control – feedback control
55
parameter I
Motor feedback control – feedback control
56
in uence
Storing different states:
Bit 0: storing function states
73
Bit 1: storing speed
Bit 2: starting up with/without ABV after a reset
28
Values Default
Notes
0 / 1
Note:
15
0 / 2
fx (Motorola) cannot deactivate itself
0 / 4
0 / 8
0 / 1
0 / 2
The values of the required settings must be added
0 / 4 0
up.
0 / 8
0 / 16
0
Selection of a motor type for additional settings
1
for motor feedback control.
2
3 5
Selection of additional function outputs on an H0
4
decoder.
See extra table 1 for how motor outputs work as
5
6 additional auxiliary functions.
7
0–63 10
Absolute Vmax for motor characteristic
0–63 20
Feedback control portion K
0–63 15
Feedback control portion I
0 = PWM without feedback control for Sine (see
0–63 63
also CV 52 motor type)
0 / 1 0 = do not store / 1 = store
7
0 = do not store / 2 = store
0 / 2
0 / 4 0 = without ABV / 4 = with ABV
or