About This Guide; Other Applicable Documents; Symbols And Conventions; Explanation Of The Warnings - Balluff BAE SA-OH-064-NP-DP02 Betriebsanleitung

BAE SA-OH-064-_P-DP02 / BAE SA-OH-064-_P-S75G
Photoelectric Sensors
1

About this guide

1.1 Validity
This guide makes available all information required for the
safe use of the amplifier range BAE SA-OH-064 with NPN
or PNP interface.
It applies to the following models ( see Type code on
page 16):
– BAE SA-OH-064-NP-DP02
Ordering code: BAE012A
– BAE SA-OH-064-NP-S75G
Ordering code: BAE0119
– BAE SA-OH-064-PP-DP02
Ordering code: BAE0128
BAE SA-OH-064-PP-S75G
–
Ordering code: BAE0127
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User's Guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2022, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2

Other applicable documents

Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3

Symbols and conventions

Individual action instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
www.balluff.com
1.4

Explanation of the warnings

Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
english 5