Basic Operation; Temperature Measurement; Display Backlight - optris MS Bedienungsanleitung

Slide the MS into the boot as shown in the
picture. Then pull the front part of the boot
carefully over the optics of the MS.
All operating elements and connections are still
accessible if the protection boot is used.

Basic Operation

T
EMPERATURE
Please aim with the unit at the target and press
the T
RIGGER
HOLD function: After release of the T
display values will be shown for 7 seconds.
Shut down: If you do not press any button
during the HOLD mode the unit shuts down
automatically after 7 seconds.
D
ISPLAY BACKLIGHT
Please press the D
T is pressed to switch the display
RIGGER
backlight on or off.
L
ASER
Please press the U
pressed to activate/ deactivate. The current
status will be shown in the display.
M
EASUREMENT
.
OWN
button while the T
P
optris MS – DE2011-04-A
button while the
27
all
RIGGER
is
RIGGER