Holiday Mode; "Boost" Function - Dimplex Dhw 301P Montage- Und Gebrauchsanweisungen

Operation
10.7.

Holiday mode

The "HOLIDAYS" (holiday mode) function can be used
to set the device to standby mode to ensure frost pro-
tection. This function can be programmed for a period
of one to 99 days. After confirmation, the period for
holiday mode is enabled.
Direct access is by pressing the
Turn the dial to open the "HOLIDAYS" menu. Set the
desired period and confirm by pressing the button.
holidays
Press the button to return to the home screen.
The "HOLIDAYS" function ends automatically when
the selected number of days has elapsed, at the time
when it was enabled. For the entire holiday time,
"HOLI. RETUR." is displayed on the domestic hot
water heat pump with a display of the remaining days.
10.8.

"Boost" function

The "BOOST" function is used to simultaneously ena-
ble both the heat pump and the electric heating ele-
ment to reduce the heating-up time. The
flashes on the display.
Direct access is by pressing the
Turn the dial to open the "BOOST" menu. Confirm
"YES" by pressing the button.
bo o st
y es
Confirm
Press the button to return to the home screen.
When the "BOOST" function has been enabled, the
symbol in the display starts flashing until the desired
water temperature is reached.
The "Boost" function is automatically disabled as
soon as the domestic hot water set temperature is
reached.
www.dimplex.de
button.
holi.retur.
8
Confirm
Set number of days
in standby
symbol
button.
10.9. Electric mode
In "ELEC. MODE" only the electric heating element is
enabled to heat the water.
NOTE
From an energy use perspective, this function should
only be used when absolutely essential (e.g. heat pump
fault).
Direct access is by pressing the
Turn the dial to open the "ELEC. MODE"
menu. Confirm "YES" by pressing the button.
elec. mode
yes
Press the button to return to the home screen.
When the "ELEC. MODE" function is enabled, the
symbol in the display starts flashing.
10.10. Enabling a second heat generator (DHW 301P+
with additional heat exchanger only)
Direct access is by pressing the
Turn the dial to open the "BACKUP" menu. Set the
preferred 2nd heat generator ("ELEC. BACKP" or
"BOIL. BACKP") and confirm by pressing the button.
Select 2nd heat generator
Backup
ELec. backp
Depending on the second heat generator selected, the
or symbol appears in the display.
Press the button to return to the home screen.
FD 0303
button.
Confirm
button.
Confirm
boil. backp
English
Confirm
EN-19