Scope Of Supply; Storage; Transport; Unpacking - Dimplex Dhw 301P Montage- Und Gebrauchsanweisungen

Scope of supply

3. Scope of supply
1 Domestic hot water heat pump

1 Documentation pouch with the following

contents:
– 1 Installation and operating instructions
– 3 Supporting feet
– 1 Transport case

4. Storage

NOTE
The permissible transport and storage temperature for
the domestic hot water heat pump is between -5 °C
and +35 °C.

5. Transport

NOTE
The hood of the domestic hot water heat pump must
not be used as a transport aid.
NOTE
No other objects are to be stored on the cardboard
packaging. This is particularly important for transpor-
tation by truck. Non-compliance can lead to destruc-
tion of the cover or the refrigeration circuit.
NOTE
Maximum tilt angle 30°
Permissible transport position:
Impermissible transport position:
NOTE
All other transport positions are prohibited.
NOTE
Transporting the device in a horizontal position may
permanently destroy the components of the heat
pump refrigeration circuit.
www.dimplex.de
NOTE
Risk of tipping over! Centre of gravity moved up-
wards. Handle with care!
Do not set down abruptly
NOTE
After installing the domestic hot water heat pump in
its installation location, wait 60 minutes before com-
missioning.

6. Unpacking

Remove the cardboard packaging. Ideally, remove it
upwards or carefully cut the packaging with a knife.
Remove the centring holders and spacers fitted
around the heat pump.
Remove the document pack and transport case and
store them securely.
Loosen the transport screw under the pallet using a
suitable tool.
Use to transport case to transport the heat pump to
the final installation location.
Remove the transport and holding wedges for the
compressor by lifting them upwards.
NOTE
The transport case should be kept away from small
children. There is a risk of suffocation.
FD 0303
English
Risk of tipping over
EN-7