Setting The Time And Date; Setting The Water Temperature - Dimplex DHW 301P Montage- Und Gebrauchsanweisungen

English
10.5.

Setting the time and date

Direct access is by pressing the
26/09/11
17:32
Set month
26 /- - /11
17:32
Set hours
monday
- - :32
Press the button to return to the home screen.
10.6.

Setting the water temperature

10.6.1. Using without PV entry
NOTE
The water temperature can be set between 30 °C to
65 °C. Up to 60 °C the water is heated using the heat
pump only. Beyond this, up to 65 °C the additional
electric heating is activated.
Direct access is by pressing the
Turn the dial to open the "TEMP. SETT." menu. Set the
desired domestic hot water temperature and confirm
by pressing the button.
Temp. sett.
Press the button to return to the home screen.
NOTE
From an energy use perspective, the setpoint for the
water temperature should not be too high. The water
temperature is set to 55 °C by default.
EN-18
button.
Set day
-- /09/11
17:32
Set year
26/09/ --
17:32
Set minutes
m o n d a y
17: --
Confirm
new
settings
button.
t a r g et
5 0
°C
Confirm
Set temperature
10.6.2. Using with PV yield
If sufficient PV yield is available for self-supply at par-
ticular times or day or year, the water temperature can
be set to a higher temperature level.
The PV yield can be set either for the heat pump alone
(T°PV ECO) or in conjunction with the heating element
(T°PV MAX).
Direct access is by pressing the
Turn the dial to open the "TEMP. SETT." menu. Set the
desired domestic hot water temperature and confirm
by pressing the button.
temp. sett.
Set temperature
T ° pv eco
6 0
Press the button to return to the home screen.
Examples of PV use:
T °pv eco
60 ° C
Domestic hot water setting for pure heat pump opera-
tion using the PV plant ("PV ECO" mode).
T °pv max
65 ° C
Domestic hot water setting for combined operation of
the heat pump and the electric additional heating ele-
ment using the PV plant ("PV MAX" mode).
FD 0303
button.
Set temperature
t a r g e t
5 0
Set temperature
T ° pv max
6 5
°C
www.dimplex.de
Operation
°C
°C
Confirm