Troubleshooting - AEG BPB355061M Benutzerinformation

12.7 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please contact with an Authorised Service Centre.
The appliance does not turn on or does not heat up
Problem
You cannot activate or operate the appliance.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
Components
Problem
The lamp is turned off.
The lamp does not work.
56 ENGLISH
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if...
The appliance is correctly connected to an electrical
supply.
The automatic switch-off is deactivated.
The appliance door is closed.
The fuse is not blown.
The Lock is off.
Check if...
Moist Fan Baking - is turned on.
The lamp is burnt out.
Step 3
Put a cloth on the bottom of the cav‐
ity.