Mounting The Solar Cell - Sygonix 2588866 Bedienungsanleitung

If necessary, insert the 3 dowels into the mounting holes.
Use the included three screws to fix the mount in the desired position.
Grab the camera and screw the threaded hole (I) onto the camera mount thread.
Turn the knurled nut on the camera mount thread against the threaded hole (I)
of the camera to lock it.

12.2 Mounting the solar cell

Only mount the solar cell on a stable surface.
Ensure that the place of installation of the solar cell is protected against ma-
nipulation. With this in mind, you should mount the solar cell at a minimum
height of 2.5 m.
When mounting, ensure a distance of no more than 3 metres between the solar
cell and the camera (depending on the USB cable length).
If dowels are needed to fix the solar cell mount (black) at the chosen place of
installation (depending on the configuration), mark the exact position of the three
mounting holes through the mount.
When mounted on a wall, the mount must be oriented so that two of the three
mounting holes point upwards. This ensures optimal stability. When it comes to
the solar cell mount, the ball joint can be adjusted freely.
Make sure you do not damage any existing wires or pipes when drilling mount-
ing holes or tightening screws.
If necessary, insert the 3 dowels into the mounting holes.
Use the included three screws to fix the wall mount in the desired position.
51