You should turn off the camera before inserting or changing the card. Turn off
the camera first. Failure to observe this can damage the memory card's file
system, whereby existing recordings will be permanently lost.
Insert the microSD card (contact pins first) into the SD card slot (M) until the
card snaps into place. The SD card must be aligned so that the contacts point
towards the USB Type-C
To remove the microSD card, push it further into the slot until it unlocks from its
mechanical lock. Then pull the card out of the card slot (M).
11.4 Turning the camera on or off
To turn the camera on, push the on/off switch (K) to the left with the help of the
pin.
The camera will turn on, and the status LED (A) will start flashing red.
To turn the camera off, push the on/off switch (K) to the right.
The status LED (A) expires.
48
camera socket (L).
TM