Status Led; Resetting The Camera To Factory Defaults - Sygonix 2588866 Bedienungsanleitung

11.5 Status LED

LED colour Status
Red flashes
Red perma-
nently lit
Blue flashes
Blue perma-
nently lit

11.6 Resetting the camera to factory defaults

To reset the camera, hold the "RESET" (J) button for about 5 seconds with the
help of the pins until the camera beeps twice. Then release the button.
The camera will restart. After the reset, the status LED (A) should start flashing
red again.
Function
The camera is in connection mode and can now be
connected to the network
An error has occurred, please restart the camera
The camera is being connected to the network and
the app
The camera is online and connected to the app
49