Hydraulic Connection; Assembly - ATH Four Lift 55HAP Bedienungsanleitung

2.8

Hydraulic connection

Note
Before the system is put into operation or is operated with oil for the first time, the following
must be observed with regard to the optimal, trouble-free as well as almost air-free function.
All hydraulic lines must be connected and tightened according to the hydraulic plan or hose designation.
All hydraulic lines and cylinders must be vented according to the hydraulic plan or hose designation.
In order to ensure the proper and safe functioning of the system and the hose lines used, it is essential to ensure
that the hydraulic fluids used comply with the specific specifications and recommendations of the manufacturer.
Used fluids that do not meet the specific requirements or have unauthorized contamination will damage the
entire hydraulic system and shorten the service life of the hydraulic systems used.
Note
A contamination of the plant is also possible by a new filling with oil.
The minimum requirement and minimum oil quantity must be checked or produced.
2.9

Assembly

Note
These instructions are not to be seen as assembly instructions, only hints and help are given
here for knowledgeable and skilled assemblers.
Warning
Appropriate clothing and individual protective devices must be worn for the following work.
Caution
Incorrect assembly and adjustments will result in exclusion of liability and warranty.
Partially pre-assembled machines must be inspected, instructed and accepted by a competent person before
commissioning.
Assembly of machines must be carried out by a skilled and qualified person.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 16.03.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
89