ATH Four Lift 55HAP Bedienungsanleitung Seite 105

Attention
DO NOT continue to push the button when the platforms have reached their full height,
otherwise the motor may be damaged.
2. Press the lowering button to lower the lift completely.
3. Repeat the complete raising and lowering of the stage at least 3 times to vent the trapped air in the cylinder
Note
If the oil level plug is lost or broken, order a replacement. The oil tank must be well vented.
2.9.2.11 Oil supply and venting of the wheel-free jack
1. Set the MAIN/JACK selector switch to the position .
2. Press the Lift button to fill the oil into the system; only the P2 wheel-free jack (the wheel-free jack on the P2
platform) is lifted during this procedure.
3. Continue pressing the Lift button to lift the P2 wheel-free jack until it reaches the top position.
4. Press and hold the Lower key to lower the P2 wheel-free jack completely.
5. Raise the P2 wheel-free jack again until it has reached the uppermost position.
6.
Simultaneously press the override switch of the wheel-free jack
free jack (wheel-free jack of the P1 secondary platform) until it has reached the uppermost position.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
1
Release date: 16.03.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
and the Lift button to lift the P1 wheel-
105