Werbung
Attention!
EN:
Prior you are starting with the hereinafter described work, you should have read the assembly instruction
completely and then laying out the required tool.
Check the packaging for damage.
Also check the pop top roof, especially the canvas and the GRP parts for damage.
Make sure that all items included in the scope of delivery (see accessories box) have been delivered complete and
free of defects.
Conduct the mounting only in the described sequence.
With non-compliance of this assembly instruction and changes at the roof, frame and locking-system expires all
liability for upraising damages, as well as all guarantee- and warranty claims through and from Reimo
The images in this document may differ from your product.
Wear suitable protective clothing for all work steps.
Information for vehicle owners (German regulations, check your local regulations before installation)
Immediate execution and confirmation of the acceptance of modification in conjunction with the
accompanying certificate of conformity
Due to the changes, the approval of the vehicle shall expire, if not as per StVZO § 19 section 3 the prescribed
acceptance procedure has not executed and confirmed or if certain local requirements will not met.
After the technical modification the vehicle is promptly to perform to an officially authorized expert or inspector of a
technical test center or a test engineer of an officially recognized monitoring organization for the execution and
confirmation of the prescribed approval.
Benötigte Werkzeuge und Materialien / Required tools and materials
•
Akkubohrschrauber mit Stahlbohrer 2.5, 5.1,
3.0 – 10.0 mm
•
Stichsäge mit Metallsägeblatt
•
Metallfeile
•
Filzstift
•
Bandmaß
•
Kartuschenpistole
•
Klebeband
•
Teppichmesser
•
Schraubendreher
•
Schutzbrille
•
Arbeitshandschuhe
•
Korrosionsschutzfarbe
•
Abglättmittel
•
Schleifvlies oder vergleichbares
•
Silikonspray
•
Unterbauklötze (bspw. Polystyrol)
o
mind. 6 cm breit
o
2x 20 cm lang
o
2x 70 cm lang
•
Kunststoffschaber
•
Winkelschleifer mit Gummi-Schleifteller und
Schleifpapier
Empfohlenes Zubehör / Recommended accessory
•
Schlafdachbett LUXUS Art.-Nr. 280720
W0002566-000_08
Stand: 18.10.2022 18:32:00
•
drilling machine with steel drill 2.5, 5.1, 3.0 –
10.0 mm
•
jigsaw with metal saw blade
•
etal file
m
•
elt pen
f
•
tape measure
•
cartridge pistol
•
adhesive tape
•
carpet knife
•
screwdriver
•
safety goggles
•
work gloves
•
anti-corrosive paint
•
tooling agent
•
sanding fleece or similar
•
silicone spray
•
distance bars (e.g., polystyrene)
o
min. 6 cm in width
o
2x 20 cm
o
2x 70 cm
•
Plastic spatula
•
angle grinder with rubber backing pad and
abrasive paper
•
Roof bed comfort item-no. 280720
Print: 18.10.2022 18:32
®
.
Seite: 2 von 21
Werbung
