Leister TRIAC ST Bedienungsanleitung Seite 7

Warning
DANGER! Danger when opening up the tool, as live components and
connections are exposed. Therefore, before opening it, unplug the tool
to ensure disconnection from the mains. Before putting into operation,
Deutsch
check power supply cord and connector as well as extension cable for
English
electrical and mechanical damage.
Français
Incorrect use of the hot air tool (eg overheating of the material) can
Español
present a fire and explosion hazard, especially near combus t ible
Português
materials and explosive gases.
Italiano
Do not touch the heating element housing, air nozzle and dis-
Nederland
charging plastizised material when they are hot as they can cause
Dansk
burns. Let the tool cool down. Do not point the hot air flow and the
Svenska
discharg ing plastizised material in the direction of people or animals.
Norsk
Suomi
Eλληνικά
Caution
Türkçe
Polski The voltage rating stated on the tool must correspond to the mains
voltage.
Magyar
Česky
For personal protection on building sites we strongly recommend
Slovensky
the tool be connected to a RCCB (Residual Current Circuit Breaker).
Românã
Slovensko
The tool must be operated under supervision. Heat can ignite
Български
flammable materials which are not in view.The machine may only
Eesti be used by qualified specialists or under their supervision. Children
are not authorized to use this machine.
Lietuviu
Latviešu
Protect tool from damp and wet.
Русский
日本語
Repairs should only be carried out by authorized Leister service
中文
points. Restricted to use with original Leister accessories and
‫ﻋﺮﺑﻲ‬
replacement parts.
ภาษาไทย
한국어
8
Translation of the Original User Manual
Warranty
• For this tool, the guarantee or warranty rights granted by the relevant distri-
butor/seller shall apply. In case of guarantee or warranty claims any manu-
facturing or workmanship defects will either be repaired or replaced by the
distributor at its discretion. Warranty or guarantee rights have to be verified by
an invoice or a delivery document. Heating elements shall be excluded from
warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandato-
ry provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and
tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered
or changed by the purchaser.
Conformity
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland,
confirms that this product, in the version as brought into circulation through
us, fulfils the requirements of the following EC directives.
Directives:
Harmonized EN ISO 12100, EN 55014-1, EN 55014-2, EN 61000-6-2,
Standards:
Kaegiswil, 15.10.2018
Bruno von Wyl, CTO
Disposal
2006/42, 2014/30, 2014/35, 2011/65
EN 61000-3-2, EN 61000-3-3, EN 62233, EN 60335-1,
EN 60335-2-45, EN 50581
Christoph Baumgartner, GM
Electrical equipment, accessories and packaging should be recycled in an
environmentally friendly way. For EU countries only: Do not dispose of electrical
equipment with household refuse!