Heatscope TUNE Installations- Und Gebrachsanleitung Seite 22

Programming a Week
EN
MO TU
Selection for weekly timer
PROGRAMMING BUTTON
Setting the weekly timer (memory spaces: P1, P2, P3, P4, P5, P6, P7 and P8)
Explanation before programming:
You can freely configure eight programs per week. Move your hand towards the touch point
without touching it. Then touch the programming button once to see what has already been
programmed. You can use the selection button to move back and forth between the eight
memory spaces. The display for the relevant memory space will switch between the program
(e.g. P1) and the values set for the memory space.
To start the programming mode for a selected program, press the programming button again.
If you do not touch any buttons for 30 seconds, the HEATSCOPE
the program menu and will only retain values that have been confirmed with the program-
ming button.
The first time the device is used, all values such as the start time and duration will be set to
zero and all days will flash, as no selections have been made.
22
Time, start time,
program selection
1 2 3 4
88.88
WE TH FR SA
DAYS OF THE WEEK
TOUCH POINT
Entering duration for
on-demand timer
SU
SELECTION BUTTONS
Time setting
Program selection
On-demand timer,
duration, status
5
88
S MODE
Temperature
limiter
Duration
TUNE will automatically exit
®