Intended Use - Dometic 10-Serie Kurzbedienungsanleitung

RCD10.5ES, RCD10.5XES, RCD10.5ET, RCD10.5XET
I
NOTE
• Put the refrigerator door and the freezer door into the winter position if the refrigera-
tor will not be used for a longer period of time. This prevents mold from forming.
• For ambient temperatures of +15 °C to +25 °C select the average temperature set-
ting.
• To avoid food waste, note the following:
– Keep temperature fluctuation as low as possible. Only open the freezer as often
and for as long as necessary. Store the foodstuff in such a way that the air can still
circulate well.
– If the temperature can be adjusted: Adjust the temperature to the quantity and
type of the foodstuff.
– Store the different foodstuff types as shown in the figures.
– Foodstuff can easily absorb or release odor or taste. Always store foodstuff
covered or in closed containers/bottles.
2.3 Safety when operating with DC power
A
NOTICE! Damage hazard
• Only select operation with DC power supply if the vehicle engine is running and pro-
viding sufficient voltage, or if you are using a battery monitor.

3 Intended use

The refrigerator is suitable for:
• Installation in caravans and motor homes
• Cooling, deep-freezing and storing food
The refrigerator is not suitable for:
• Storing medications
• Storing corrosive substances or substances that contain solvents
• Quick-freezing food
The refrigerator is intended for installation in a piece of cabinetry or an installation niche.
This refrigerator is not intended to be used in household applications.
The frozen compartment is suitable for storing pre-frozen food, storing or making ice cream and making ice cubes.
It is not suitable for freezing previously unfrozen food.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible fail-
ure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
EN
Intended use
7