Checchi & Magli BABY COMPACT Bedienungs- Und Wartungsanleitung Seite 80

Replacing the flexible plate
UN41 0362AL
For this operation, proceed as outlined below.
1) Loosen the wing nut (A).
2) Turn the lock lever (B).
3) Push the share forwards and turn it so it is facing
downwards.
4) Release the spring (C).
5) Unscrew the screws (D).
6) Remove the flexible plate (E).
7) Fit the new flexible plate in position.
8) Tighten the screws (D).
9) Attach the spring (C).
10) Make sure the flexible plate is centred (see "Adjust-
ing the flexible plate centring").
English language
INFORMATION CONCERNING REPLACEMENTS
A
B
11) Check the position of the flexible plate with respect
to the share (see "Adjusting the flexible plate posi-
tion").
12) Refit the share in the work position.
13) Make sure that the share is secured in place with the
lock lever (B).
14) Tighten the wing nut (A).
Information
Check that the plant control plate is inside the share.
36
8
D
E
C
Use and maintenance