Checchi & Magli BABY COMPACT Bedienungs- Und Wartungsanleitung Seite 64

Adjusting the planting unit load
The adjustment unit is usually mounted in position (A).
Setting the unit to position (A) decreases the weight on
the packing wheels.
Setting the unit to position (B) increases the weight on
the packing wheels.
A
C
UN41 0055AL
Adjusting the automatic safety release function
The automatic release is designed to protect the trans-
mission components from overloads (e.g. if the dispens-
er or ejector jams).
The device, installed on every planting unit, is already set
by the manufacturer during the testing stage, but can be
adjusted by the user according to requirements.
For adjustments, proceed as outlined below.
1) Turn the ring nut (A) clockwise to increase the release
resistance (i.e. less sensitive).
Turn the ring nut (A) anticlockwise to decrease the
release resistance (i.e. more sensitive).
English language
ADJUSTMENT INFORMATION
Proceed as outlined below.
1) Turn the handwheel (C) clockwise or anticlockwise to
increase or decrease the load of the planting unit on
the ground.
B
UN41-0056CF
20
5
A
Use and maintenance