Checchi & Magli BABY COMPACT Bedienungs- Und Wartungsanleitung Seite 55

Lifting the work unit
The lifting procedure shown applies for all the work ve-
hicle models specified in the manual.
For models BABY COMPACT/3 and BABY COMPACT/5
the seat must be removed to allow the lifting means to
be fitted.
D
C
B
UN41 0064CF
Proceed as outlined below.
1) Use the specific tool (A) provided with the work vehi-
cle for lifting.
2) Strap up the work vehicle as shown in the figure.
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
11
The illustration shows the work vehicle with two plant-
ing units.
A
3) Check that the pin (B) is secured by the lock pin (C)
and that the chains are fastened stably to the frame
(D).
4) Lift the work vehicle.
4
D
Use and maintenance