Checchi & Magli BABY COMPACT Bedienungs- Und Wartungsanleitung Seite 57

Adjust the spacing between the packing wheels (B) as
required.
The farther apart the wheels are, the less efficient the
packing is.
The closer the wheels are, the more efficient the packing
is.
Adjusting the packing wheel scraper
The scraper is used to clean the packing wheels, remov-
ing any soil and debris that has built up.
Proceed as outlined below.
1) Loosen the screw (A).
2) Turn the scraper (B) until it reaches the desired posi-
tion.
3) Tighten the screw (A).
4) Repeat the same procedure for the other scraper.
Adjusting the plant control plate
The plant control plate stops the seedlings falling down-
wards before they are ejected.
A
B
UN41 0044CF
Proceed as outlined below.
1) Loosen the nut (A).
2) Adjust the plate (B) as required.
English language
ADJUSTMENT INFORMATION
Proceed as outlined below.
1) Remove the pins (A).
2) Open out the packing wheels (B) as required and
then lock them in position with the relative pins (A).
UN41 0195NG
Move the plate down for smaller seedlings and up for
taller seedlings.
3) After adjustment, tighten the nut (A).
13
B
5
A
Use and maintenance