Troubleshooting; Problem Solving - Respekta CH 66060 BSGA Bedienungs- & Installationsanleitung

7 : TROUBLESHOOTING

7.1

Problem solving

Error
Light working, motor
not working
Light not working,
motor not working
Traces of oil
Insufficient air suction Distance between hood and hob is
Device is unstable
Possible cause
Fan switch off
Fan switch fault
Motor fault
Fuses blown in the home electrical
system
Faulty light bulbs
Restore power supply / connect
appliance cable correctly
Leakage from V-flap
Leakage from joint between chimney
and hood cabinet
Cabinet is not securely mounted
excessive
Excessive air flow from an open door
or window
Mounting bracket not securely fixed
Fixing screws not tightened
Solution
Select a setting on the fan switch
For the repair, contact customer
service
For the repair, contact customer
service
Replace blown fuses
Replace bulbs
Check the fuse, connect the cable
correctly. Switch on the electrical
socket.
Seal V-flap
Seal the joint with suitable means
Mount cabinet securely
Lower position of hood
Close doors and windows
Tighten mounting bracket
screws
Tighten fixing screws
fixing
en-37