Respekta CH 66060 BSGA Bedienungs- & Installationsanleitung Seite 72

Special information for appliances with stainless steel panels
Clean using a commercial non-abrasive detergent for stainless steel.
The stainless steel should be cleaned periodically (e.g. weekly) to achieve the maximum possible
durability.
We recommend treating with a specific detergent for stainless steel to keep the surfaces clean for as
long as possible.
WARNING: Never use detergents for stainless steel near the control buttons.
WARNING: When cleaning the metal grease filters take care not to damage the mesh.
Frequent cleaning or use of aggressive detergents can cause colour changes of the metal
surface. Such changes do not affect operation of the filter and shall not be accepted as a
motive for warranty claims.
Cleaning the control panel surface
The control panel can be cleaned with warm water and soap. Make sure the cloth is clean and well
wrung-out before cleaning. Use a soft dry cloth to remove any residual moisture after cleaning.
WARNING: Use neutral detergents and avoid the use of aggressive chemical cleaning
products, strong domestic detergents or products containing scouring powder, as this
would mar the appearance of the appliance and invalidate the warranty.
en-33