Respekta CH 66060 BSGA Bedienungs- & Installationsanleitung Seite 69

Attach the exhaust duct (1) at the outlet and secure it
with a clamp (2).
Fit the bracket (3) on the outer chimney (4) with two 4x8
mm pan head screws; make sure the inner chimney (5)
slides freely.
Attach the hood to the wall and adjust its position.
Secure the hood with two 4x30 mm safety screws.
NOTICE: The two safety vents are located
on the rear housing, with 6 mm diameter.
en-30
1 1
Fig. 5.12
5 5
3 3
4 4
Fig. 5.13
Fig. 5.14
2 2