Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using the appliance
Operation
Initial switch-on
When the oven is connected to the power supply for the
first time, a beep sounds and the display shows „12.30"
with the dot flashing (time setting mode).
To be able to use the oven, you must first set the current
time of day.
Setting the time of day
To set the time, the oven must be in the time setting mode,
which is activated automatically after connection to the pow-
er supply. For manual activation, press and hold the and keys
and
for more than 3 seconds.
• Use the
and
keys to set the current hour.
• Now press
to confirm.
• Use the
and
keys again to set the current minute.
• Confirm the setting with the
Use of the oven
Note: We recommend that you first run the oven at 200
degrees for 30 minutes to remove residues (See chapter of
turning on the the appliance).
• In standby mode, press and hold the
than 3 seconds to activate manual mode. The
displayed (cooking process does not start yet).
• Use the function selector knob to set the desired heating
mode and the temperature selector knob to set the desired
oven temperature. The cooking process is started.
• With the
key you can set the time mode.
• If you select an automatic mode
cooking time / fully automatic), the oven switches to
standby mode automatically when the cooking process
is complete.
• If you use the manual mode or the alarm function
the selector knobs must be turned to zero position to
stop the cooking process. To put the appliance in standby
mode, press and hold the
3 seconds.
Time modes
• Select the desired time mode by pressing the
several times if necessary.
The sequence is as follows:
• Manual mode
• Alarm function
• Cooking duration (dur); semi-automatic
• End of cooking time (End); halbautomatisch
• alternatively, if a cooking duration (dur) has been set:
Cooking duration + End of cooking time (dur + End);
fully automatic
40
key.
key for more
icon is
(duration / end of
,
and
keys for more than
key
Manual mode
The cooking time must be monitored by yourself.
• Select the manual mode by pressing the
The current time and the
• Set the desired heating mode and temperature with the
appropriate knobs.
The cooking process then starts immediately.
Note: To make sure that you have not forgotten to switch
off the oven, the display starts flashing after 5 hours as a
warning and after 10 hours the oven automatically switches
to standby mode.
• If the display is flashing, press either any key to continue
the cooking process, or press and hold the
for more than 3 seconds to switch to standby mode.
Alarm function
When activated, a beep signal sounds after a specified period
of time. The cooking process remains unaffected.
• Set the desired heating mode and temperature with the
appropriate knobs.
• Use the
key to set the alarm function
• Use the
and
keys to set the desired time period for
the alarm countdown.
• Press the
key to confirm the setting.
The continuous display of the
alarm has been activated.
• When the set time has expired, a beep sounds and the
icon flashes.
• To stop the alarm, press any key for less than 3 seconds.
The
icon disappears from the display.
Note that the timer has no influence on the
cooking process, but serves only as a warning /
reminder.
Cooking duration semi-automatic mode
The appliance stops cooking automatically after a set period
of time. The maximum cooking time that can be set is 10
hours.
• Place your food in the oven and set the desired heating
mode and temperature with the appropriate knobs.
• Press the key
repeatedly until „dur" is displayed.
• Use the
and
keys to set the desired cooking duration.
• Confirm the setting with the
• The current time and the
and the cooking process starts.
key .
icon are displayed.
and
.
icon indicates that the
key.
and
icons are displayed
keys
Werbung
Inhaltsverzeichnis
Fehlerbehebung
