Operation - KKT KOLBE EB9105ED Benutzerhandbuch

Using the device

Operation

Press the button to turn the oven on. When turned on,
the display will light up and the time of day will be shown.
Function / Temperature
To select a function, press the
through the functions and press SELECT
have reached the required function. Press the
buttons to adjust the temperature followed by SELECT
again to confirm and start cooking. The
illuminate on the display whilst the oven is heating up to
the required temperature.
Note: All functions that include the
also use the Rotisserie function. If required ensure the
Rotisserie equipment is inserted into the motor before
starting the programme.
Light function
Press the button to turn the internal oven lights on &
off. The lights will automatically turn off if no operation
within 3 minutes.
Boost function
When the set temperature exceeds 100ºC, you can press
the BOOST key to heat up the oven faster. Once pressed
the boost symbol will be displayed on the screen. The
boost function will deactivate once the oven gets to the
set temperature.
The boost function can only be used with the following
programmes:
32
/ buttons to toggle
once you
/
symbol will
symbols can
Time setting
Time zone can show "Time, Duration time, End of cooking
time and Alarm" in this sequence:
All time settings can be operated by pressing
SELECT and .
Alarm setting
To set the Alarm/minute minder, press the
the symbol starts to flash. Use
time, and then press SELECT
to cancel the alarm, set the alarm time back to '0.00' and
press SELECT to confirm.
When the time is up, the alarm will sound for 90 seconds,
and the symbol will begin to flash. To stop the alarm,
press either , / or SELECT
Setting the time
To set the time, turn the oven on, and then press and hold
the button for 3 seconds until the time begins to flash.
Adjust the time using the /
to confirm. When the oven is first turned on or restarts,
the time must be set before using the oven.
Duration cooking (0-10hrs)
Once a function and temperature have been selected,
press the button and the Duration time will start to
flash. Press / to adjust the time, and then SELECT
to confirm. Once the time is up, the alarm will sound and
the oven will switch off.
Press any of the buttons /
off the alarm.
To cancel Duration cooking set the cooking time to '0:00'
and confirm.
End cooking time
Once the Duration cooking time has been set, press
twice and the End cooking time should start to flash.
Adjust the time to the time you wish cooking to stop and
press SELECT to confirm.
Your oven will then work out when to turn on, so that it
cooks for the required duration time, and finishes at the
required end time. E.g. Duration time set at 30 minutes,
and the end time set to 18.15, the oven will automati-
cally turn on at 17.45 and cook for 30 minutes on the set
function and temperature (start time = End time - duration
time).
/ ,
button until
/ to adjust the
to confirm. If you want
.
and then press SELECT
, SELECT , and to turn