Ethernet/Ip Technical Specifications - Grundfos CIM 500 Montage- Und Betriebsanleitung

7.4 EtherNet/IP technical specifications

Minimum requested packet interval
I/O data
Number of IO connections
Number of encapsulation sessions
Number of explicit messaging connections
User-specific objects
Maximum number of connections
Standard objects
DHCP
Functional scope
Watchdog
Certificate
15 ms
505 bytes output.
509 bytes input.
Maximum 255 bytes I/O data per assembly.
10
Default. Configurable depending on available socket
resources.
10
Default. Configurable depending on available socket
resources.
2 explicit messaging connections per encapsulation
session.
20 explicit messaging connections in total. Configurable.
Object 100. Depending on the connected product.
• Grundfos pump
• Grundfos booster
• Grundfos dosing.
2 explicit messaging connections x 10 encapsulation
sessions.
Additional 10 I/O connections.
Total: 30 connections.
• Identity object (class 0x01).
• Message Router object (class 0x02).
• Assembly object (class 0x04). Assembly: up to 32.
• Connection Manager object (class 0x06).
• Device Level Ring (DLR) object (0x47).
• Quality of Service (QoS) object (0x48).
• TCP/IP Interface object (0xF5).
• Ethernet Link object (0xF6).
Supported
• Adapter.
• Support of 2 Ethernet Link objects for implementing
ring and daisy chain topologies.
• Device Level Ring (DLR) protocol (announce-based
ring node).
• Quality of Service (QoS).
• IPv4 Address Conflict Detection (ACD).
Communication watchdog with fixed 5 seconds time-out.
It can be enabled via the CIM 500 web page.
Plugfest December 2018, Conformance July 2019.
25