KNF LABOPORT SH820G Originalbetriebsanleitung Seite 128

Setup and connection
Pump discharge 4. At the pneumatic outlet of the vacuum system, safely dis-
44
Fig.7: Mount collection flask
charge the pump discharge.
5. Lay the line at the pneumatic inlet and the line at the
pneumatic outlet in a downward slope so that no conden-
sate can run into the pump.
6. SH820G and SH840G only:
Install the coolant supply and coolant drain on the con-
denser (see 12).
7. Plug the plug of the power cable into a properly installed,
grounded socket.
Translation of Originial Operating Instruction, KNF 325562-325564 02/23
Vacuum system SH820G / SR820G / SH840G / SR840G