Technical Information - Jamestown Landon Bedienungsanleitung

All end users are responsible for deleting any personal
data stored on waste devices prior to their disposal.
Disposal of the packaging
The packaging consists of cardboard and cor-
respondingly marked plastics that can be recy-
cled.
– Make these materials available for recy-
cling.

Technical information

Technical data
Item number
Nominal voltage
Nominal output
Number of temperature probes
Protection class
Protection type
Fan Work
• The fan would start running after the pellet grill is
turned on. It would keep running for 10 min when the
grill is turned off or the temperature decreases to
54 °C.
Fire Rod Work
• In the first ignition, keep pressing the On/Off switch,
the ignition rod would run for 8 min after the motor is
running for 1 min.
• The grill would restart the ignition when the temper-
ature is less than 57 °C and would stop ignition
when the temperature is higher than 76 °C.
• When the temperature is 9 °C lower than the set
temperature (e.g. temperature is less than 121 °C
when the set temperature is 112 °C), the ignition
would be on for 5 min, and then shut off when the
temperature increases to 3 °C lower than the set
temperature.
Feeding Motor
• In the 1st pellet feeding, the feeding motor would be
off for 15s and then on for 30s for feeding pellets. It
would start 2nd feeding when the temperature
increases by 21 °C.
• In the 2nd pellet feeding, it would continue feeding
by the built-in PID controller when the temperature
is higher than 57 °C.
• When the temperature is less than 57 °C, the motor
would be off for 15s and then on for 30s for feeding
pellets. If the temperature is less than 57 °C for 6
min later, the grill would enter Low-temperature pro-
tection, which it would be powered off and the dis-
play would show [ERL]
609555, 609556
230 V~, 50 Hz
220–270 W
2
I
IPX4
GB
33