Safety Instructions - Kuhtreiber ABR Inductor 2 kVA Bedienungsanleitung

general information
The device is manufactured in accordance with all stan-
dards and regulations of European union and the Czech
republic.
improper operation or incorrect use can result in dan-
gers involving:
- endangering the health and life of the operator or
other persons,
- damage to the device and other property of the opera-
tor,
- deterioration of the efficiency of work with the device.
all persons who install, operate, care for and maintain
the device must:
- have appropriate qualifications
- read these operating instructions in full and follow
them carefully
always keep the operating instructions in a place where
the device is operated. in addition to these instructions,
it is essential to comply with the relevant general and
local regulations regarding accident prevention and en-
vironmental protection. any faults that could impair the
safe operation of the device must be removed before
switching it on.
CE-marked devices meet the basic require-
ments of the low-voltage and electromagnetic
compatibility directives in accordance with the
applicable standards.

Safety Instructions

Work environment and storage
The power supplies are capable of delivering
rated power under the following environmen-
tal conditions:
a) ambient air temperature range:
during use: -10 ˚C to + 40 ˚C;
during transport and storage: -20 ˚C to + 55 ˚C;
b) relative humidity:
up to 50% at 40 ˚C; up to 90% at 20 ˚C
c) ambient air without excessive amounts of dust, acids,
corrosive gases or substances, etc., other than those
generated by heating;
d) altitude up to 1 000 m;
e) inclination of the current source up to 10 ˚C.
Note: Different environmental conditions may be agre-
ed between the manufacturer and the customer and
the power supply is marked accordingly. Examples of
these conditions are: high humidity, unusually corro-
sive fumes, steam, excessive oil mist, excessive vibrati-
on or shock, excessive dust, harsh weather conditions,
unusual coastal or on-board conditions, insect infestati-
ons and fungal-promoting atmospheres.
10 | en
hazards
electromagnetic field
• Electromagnetic field generated by the de-
vice intended for heating can be dangerous
people with pacemakers, aids for the deaf and
with similar devices. These people must con-
sult their doctor about the approach to the
connected device.
• Do not place watches, magnetic data carriers, clocks,
etc. while the device is in operation. Permanent da-
mage to these devices may occur due to magnetic
fields.
• The machines comply with the protection require-
ments set out in the Electromagnetic Compatibility
(EmC) directives. The machine is designed for indu-
strial use in terms of interference suppression. They
are expected to be widely used in all industrial areas,
but not for home use! in case of use in non-indus-
trial premises, special measures may be required. if
electromagnetic disturbances occur, it is the user's
responsibility to resolve the situation.
When working, do not wear any metal objects
such as jewelry, rings, watches, chains, identi-
fication tags, belt buckles, piercings or clothing
with metal parts such as metal rivets, buttons
and zippers, etc. - the device can very quickly
heat up and cause severe burns or even igniti-
on of clothing.
CAUTION: The applicator coil and heated object can
reach high temperatures and cause burns and / or fire.
always wear safety goggles or a shield when
using the device.
When using the device, dangerous fumes can
be generated due to the burning of old paints,
lubricants, sealants, adhesives, etc. These ex-
halations may be toxic. always wear appropri-
ate protective masks or respirators.
always wear protective gloves with adequate
heat resistance when working with the device.
high temperatures arising when using the de-
vice can cause severe burns if touched with a
heated part.
always maintain the correct posture and ba-
lance due to the safe inspection of the equi-
pment even in the unexpected situations. Do
not use your device near pyrotechnic devices
(eg airbags). The heat generated can cause
them to explode unexpectedly. Keep a mini-
mum distance of 10-20 cm from these devi-
ces.
associated with the