Herunterladen Inhalt Inhalt Diese Seite drucken

Set Up The Telephone; Package Contents; Location; Connect The Corded Base Station - Geemarc AMPLIDECT 295 Photo Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für AMPLIDECT 295 Photo:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2.

SET UP THE TELEPHONE

2.1

Package Contents

The package contains the following items:
Base station
Cordless handset
AC power adapter
NiMH rechargeable battery pack
Telephone line cord
User's manual
2.2

Location

For maximum coverage and reduce the interference, here are some guidelines you
should consider when you place the base unit,
-
place it at a convenient, high, and central location with no obstructions between
the handset and base unit in an indoor environment.
-
place it away from electronic appliances such as televisions, microwave ovens,
radios, personal computers, wireless devices or other cordless phones.
-
avoid facing radio frequency transmitters, such as external antennas of mobile
phone cell stations.
-
avoid plugging it into the same circuit as other major household electrical
appliances because of the potential for interference. Try moving the appliance or
the base unit to another power outlet.
If the reception for a base unit location is not satisfactory, move it to another location
for better reception.
Depending on the surrounding conditions as well as spatial and structural factors, the
range may be reduced. The range indoors is normally less than outdoors.
2
2.3

Connect the Corded Base Station

Plug the large end
of the larger power
adapter into an
electrical outlet not
controlled by a wall
switch.
Route the cords
through the slots.
Plug the small end
of the larger power
adapter into the power
jack on the back of the
telephone base.
NOTE
Use only the power adapter supplied with the base station.
Classified TNV-3 according to EN62368-1 standard.
Classified "hazardous voltage" according to EN62368-1 standard.
Plug one end of the
telephone line cord
into a telephone jack
or a DSL filter.
A DSL filter (not included)
is required if you have
DSL high-speed Internet
service. The DSL filter
must be plugged into the
telephone wall jack.
Telephone line cord
Plug the other end of
the telephone line cord
into the TEL. LINE
jack on the back of the
telephone base.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis