Record Your Outgoing Message (Ogm); Playback The Outgoing Message (Ogm); Delete A Personalized Ogm (Set Ogm To Default); Set The Answer Delay - Geemarc AMPLIDECT 295 Photo Bedienungsanleitung

10.5.2 Record your Outgoing Message (OGM)

You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When
you record your own OGM, it will be used when the answering machine answers
the call. If your personalized OGM is deleted, the pre-set OGM will be restored
automatically.
Using a handset:
1. Press LEFT SOFTKEY and
2. Press LEFT SOFTKEY and
3. Press LEFT SOFTKEY and
4. Press LEFT SOFTKEY and
5. Press LEFT SOFTKEY and
6. Press LEFT SOFTKEY to start recording your personalized OGM and
"RECORD'G" will be displayed on the screen.
7. Press LEFT SOFTKEY to stop and save your personalized OGM. Your newly
saved OGM will play automatically. Alternatively, press RIGHT SOFTKEY
return to previous screen without saving the personalized OGM.

10.5.3 Playback the Outgoing Message (OGM)

Using a handset:
1. Press LEFT SOFTKEY and
2. Press LEFT SOFTKEY and
3. Press LEFT SOFTKEY and
4. Press LEFT SOFTKEY and
5. Press LEFT SOFTKEY and
6. Press LEFT SOFTKEY to play your personalized OGM (if you have recorded a
personalized OGM before) and "PLAYING OGM"will be displayed on the screen.
7. Press LEFT SOFTKEY to stop the OGM playback and return to the previous
menu.
NOTE:
If a personalized OGM is not recorded before, the pre-set OGM will be played.
/ to select ANS. MACHINE.
/ to select TAM SETTINGS.
/ to select OGM SETTINGS.
/ to select ANS & REC or ANSWER ONLY.
/ to select RECORD MSG.
/ to select ANS. MACHINE.
/ to select TAM SETTINGS.
/ to select OGM SETTINGS.
/ to select ANS & REC or ANSWER ONLY.
/ to select PLAYBACK.
38

10.5.4 Delete a Personalized OGM (SET OGM to DEFAULT)

Using a handset:
1. Repeat Steps 1 to 6 in the section of Playback the Outgoing Message (OGM).
2. Press RIGHT SOFTKEY to delete your personalized OGM and return to previous
menu and the pre-set OGM is restored automatically.
NOTE:
If pre-set OGM is playing, you are not allowed to delete the pre-set OGM.

10.5.5 Set the Answer Delay

You can set the number of rings before the answering machine answers and starts
playing your OGM. You can set the answering machine to answer after two to eight
rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first new
message has been registered - then the answering machine switches to answering
after approximately 2 signals. This is useful when using remote access; if you call up
to
the answering machine and there is no reply after four rings that means there are no
messages recorded and you can hang up before you are charged for the call.
Using a handset:
1. Press LEFT SOFTKEY
2. Press LEFT SOFTKEY
3. Press LEFT SOFTKEY
4. Press LEFT SOFTKEY
(Available options: 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER).
5. Press LEFT SOFTKEY

10.5.6 Set the Recording Time of Incoming Message

You can set the maximum length of the recording time of the incoming messages.
Using a handset:
1. Press LEFT SOFTKEY
2. Press LEFT SOFTKEY
3. Press LEFT SOFTKEY
4. Press LEFT SOFTKEY
(Available options: 60S, 120S, 180S, or UNLIMITED).
5. Press LEFT SOFTKEY
and / to select ANS. MACHINE.
and / to select TAM SETTINGS.
and / to select ANSWER DELAY
and / to select your desired answer delay.
to confirm.
and / to select ANS. MACHINE.
and / to select TAM SETTINGS.
and / to select RECORD TIME.
and / to select your desired recording time
to confirm.
39