Installation; Connection; Batteries Setting Up; Batteries Use - Geemarc AmpliDECT250 Benutzerhandbuch

Installation

1 - Connection

Connect the line cord plug to the line socket on the base. Connect the other end of the line cord to
the PTT socket. (**)
Plug the power cable into the power socket on the base. Plug the adaptor into
the mains supply. (*)
2 – Battery installation
Install the rechargeable batteries in the handset. The handset requires three Nickel Metal Hydride
(NiMH) AAA batteries. These are supplied with your telephone.
Check the battery polarity diagrams on the handset when inserting the batteries.
Fit the battery cover by sliding the cover on to the back of the handset until it
snaps shut
3- Battery status
Place the handset on the base, a short beep will be heard. The Power/Charging indicator lights up
(red). The battery symbol will be displayed on the handset. Once the handset is fully charged, the
display will show a full battery symbol.
9