Delete All Messages On Tam; Record Memos On Tam; Answering Machine Settings; Set The Answer Mode - Geemarc AMPLIDECT 295 Photo Bedienungsanleitung

NOTE:
Alternatively, you can use the following shortcut keys to control different operation
during message playback.
•
Press 5 to stop message playback then press Ok soft key to restart the
playback of all messages.
•
Press 4 to skip to repeat playing the current message from the beginning. Press
4 twice to skip backward to the previous message.
•
Press 6 to skip to play next message.
•
Press 2 to delete the current message playback.
•
Press / to adjust the playback volume.
•
Press to turn the speakerphone on or off.

10.3 Delete all Messages on TAM

Using a handset:
1. Press LEFT SOFTKEY and
2. Press LEFT SOFTKEY and
3. Press LEFT SOFTKEY .
4. Press LEFT SOFTKEY again to confirm delete all old messages.
NOTE:
You cannot delete new messages, so you will have to play them before trying to
delete.
/ to select ANS. MACHINE.
/ to select DELETE ALL.
36
10.4

Record Memos on TAM

You can record your memo message for another user. When you record a memo, the
message counter will increase by one and the message can be played in the same way
as answering machine messages. Memo recording can still function even when the
answering machine is turned off.
Using a handset:
1. Press LEFT SOFTKEY and
2. Press LEFT SOFTKEY and
to start memo recording and "RECORDING" will be
3. Press LEFT SOFTKEY
displayed.
4. Press LEFT SOFTKEY to stop memo recording and save the memo.
OR
Press RIGHT SOFTKEY to stop memo recording without saving and go back
to TAM menu.
10.5

Answering Machine Settings

10.5.1 Set the Answer Mode

By default, the answer machine is set in ANS&REC mode which allows callers to leave
a message. This mode can be changed to ANSONLY which does not allow callers to
leave a message. In that case, your callers will be prompted to call back later.
You can select ANS & REC or ANSWER ONLY for the answering machine.
Using a handset:
1. Press LEFT SOFTKEY and
2. Press LEFT SOFTKEY and
3. Press LEFT SOFTKEY and
4. Press LEFT SOFTKEY and
5. Press LEFT SOFTKEY to confirm.
/ to select ANS. MACHINE.
/ to select MEMO.
/ to select ANS. MACHINE.
/ to select TAM SETTINGS.
/ to select ANSWER MODE.
/ to select ANS & REC or ANSWER ONLY.
37