Delete The Entire Redial List; Find The Handset; Make An Internal Call; Intercom - Geemarc AMPLIDECT 295 Photo Bedienungsanleitung

4.9.4

Delete the Entire Redial List

Using a handset:
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press LEFT SOFTKEY and
3. Press LEFT SOFTKEY to confirm.
4. Press LEFT SOFTKEY to reconfirm.

4.10 Find the Handset

This feature helps you find the misplaced handset(s).
You can locate the handset by operation on the base station as below.
•
In idle mode, press /HANDSET LOCATOR.
All the handsets registered to the base will produce the paging tone, and "PAGING" will
flash on the screen. You can stop the paging by pressing
RIGHT SOFTKEY on any handset or
paging.
NOTE:
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
4.11

Make an Internal Call

This feature allows you to make internal calls, transfer external calls and make
conference calls. If the called handset is not answered within 60 seconds, it will stop
ringing and the calling one will return to standby mode.
4.11.1

Intercom

Using a handset:
1. In idle mode, press RIGHT SOFTKEY
handsets will display except the calling handset.
2. Enter the desired handset number you want to intercom with.
3. The called handset rings. Press
internal call.
Using the Handset
If you receive a call on the base in speaker mode, the call is automatically
transferred on the handset if the handset is removed from the base.
NOTE:
If only one cordless handset is registered to the base station, internal call will not be
available.
/ to select DELETE ALL.
/ / /
/HANDSET LOCATOR on the base to stop
and the numbers of the registered
or on the called handset to establish the
18
4.11.2

Call All Handsets

Using a handset:
1. In idle mode, press RIGHT SOFTKEY
handsets will display except the calling handset.
2. Press 9 to ring to all registered handsets.
4.11.3

Transfer an External Call

Using a handset:
During an external call:
1. Press LEFT SOFTKEY and
2. Press LEFT SOFTKEY to select the desired handset you want to intercom
with.
3. The external call is put on hold automatically and the called handset rings.
4. Press or on the called handset to establish an internal call.
5. Press on the calling handset or put the calling handset on the charging cradle to
end the current call with the external party.
6. The external call is transferred to the called handset.
4.11.4

Make a 3-way Conference Call

The conference call feature allows one external call to be shared with the corded
base and cordless handset or two cordless handsets. The three parties can share the
conversation and no network subscription is required.
Using a handset:
During the external call:
1. Follow Steps 1 to 4 in section 4.11.3.
2. Press and hold on the calling handset to establish the conference call.
NOTE:
Any party (corded base or cordless handset) hangs up during a conference call will
leave the other party still in connection with the external call.
and the numbers of the registered
/ to select INTERCOM.
19