Instructions For Use; Charging The Battery - eta FENITE Bedienungsanleitung

III. INSTRUCTIONS FOR USE
First, remove all packaging material, remove the
appliance and accessories. Then remove any
adhesive films, stickers or paper from the appliance
and accessories. The appliance can be used for
both battery and mains operation.

CHARGING THE BATTERY

Before you can use the appliance properly, you need
to charge its battery. Its running time per charge
depends on the load and the selected attachment
and is around 3-4 hours.
The appliance can be charged / operated with
a connected USB cable to a mains source i.e.
an AC adapter or backup power source.
To charge, first plug the USB cable into the power
socket A7 or D1 (if using a charging stand) and then
the USB end to a compatible power source. After
charging, disconnect the power supply first, then the
cable directly from the appliance/stand.
– A discharged battery is signaled by the flashing
of the A6 icon (from value < 5%)
– Charging is indicated by the display of the A6 icon
and the increasing value of the battery capacity.
– Full charge is indicated by the display of the value
100, the A6 icon disappears.
– Charging time is approx. 2.5 hours (direct charging)
and 3 hours when using the charging stand D.
ASSEMBLY
Assemble the extensions according to Fig. 1.
To release the extensions B and C it is necessary
to press button A8.
USE
a) Epilation attachment B
• Perform the epilation peel on clean skin (or the
skin can be washed - moistened skin and hairs
will facilitate the entire epilation process).
EN - 31
EN