eta FENITE Bedienungsanleitung Seite 28

EN
• The appliance has no charging
source of its own, it is only
designed for charging via USB (an
adapter with USB output, PC with
USB output with output voltage
of 5.0 V, and output current of
1000 mA). Before making any
connection, please pay attention
to instructions of the manufacturer
of the respective power source.
• Never use the appliance if the
adapter is damaged, if the
appliance does not operate
properly, fell on the ground and
suffered any damage, or fell into
water. In such case bring the
appliance to the specialised service
centre to verify the appliance safety
and proper operation.
• For additional protection we
recommend installing a protective
switch (RCD) in the electrical
circuitry of the bathroom, with
the nominal actuating current
not exceeding 30 mA. Ask an
inspecting technician or an
electrician for advice.
• If the appliance is used in a
bathroom, it must be disconnected
from the mains after use by
unplugging the power cord from the
wall socket, because the appliance
poses a risk if near to water, even
when switched off.
EN - 28