Vor der Inbetriebnahme
Before starting up
Entnahme der Lok aus der Verpackung (Fig. 1)
Deckel der Verpackung öffnen. KunststoffSchutzverpackung
mit Lok entnehmen und auf einen Tisch oder ähnliches abstellen.
Lasche (1) lösen, Deckel und Seitenteile der Schutzverpackung weg-
klappen, Lok entnehmen.
Removing the locomotive from packaging (Fig. 1)
Open package lid. Take out plastics protecting package with
engine and put it down on a table or similar item.
Loosen latch (1), fold away lid and side parts of protecting package,
take out engine and take out engine.
Fig. 1
Zusatzbauteile montieren (Fig. 2)
In der Verpackung sind zusätzliche Bauteile lose beigelegt.
• 1 = 1x Begrenzungslampe links
• 3 = 1x Arbeitslampe links
• 5 = 1x Stirnlampe
• 7 = 1x Spiegel rechts
• 9 = 1x Kran Atlas
• 11 = 2x Öse
Fitting additional parts (Fig. 2)
Accessory parts have been loosely enclosed in the packaging.
• 1 = 1x Position light left
• 3 = 1x Working lamp left
• 5 = 1x Head light
• 7 = 1x Mirror right
• 9 = 1x Crane Atlas
• 11 = 2x Eyelet
Fig. 2
1
• 2 = 2x Stange Rockinger
• 4 = 1x Spiegel links
• 6 = 1x Arbeitslampe rechts
• 8 = 1x Begrenzungslampe rechts
• 10 = 1x Werkzeugkiste
• 12 = 2x Kupplung Rockinger
• 2 = 2x Rod Rockinger
• 4 = 1x Mirror left
• 6 = 1x Working lamp right
• 8 = 1x Position light right
• 10 = 1x Tool box
• 12 = 2x Coupling Rockinger
4