Beko BBCW13400DX Bedienungsanleitung Seite 20

On models with wire shelves :
On models without wire shelves :
Tray stopping function
There is also a stopping function to pre-
vent the tray from tipping out of the wire
shelf. While removing the tray, release it
from the rear stopping socket and pull it
towards yourself until it reaches the front
side. You must pass over this stopping
socket to remove it completely.
Proper placement of the wire grill and tray
on the telescopic rails-On models with
wire shelves and telescopic models
Thanks to telescopic rails, trays or the wire
grill can be easily installed and removed.
When using trays and wire grills with the
telescopic rail, care should be taken that
the pins on the front and back of the tele-
scopic rails, rest against the edges of the
grill and the tray (shown in the figure).
EN / 20