Bergstrom IRIS Diagnose Bei Ausfällen Seite 9

• Fuse is blown out. Before changing it, look for causes (short-circuit, failure of some electric
components, etc.).
• Check current inlet connections and earth connection.
• Fan motor is broken down. Replace.
• Pump filter blocked. Replace.
• Electrovalve failed. Replace.
• The water pump does not work. Replaced.
• Level sensor failed. Replace.
• Check the electrical connections and water pipes.
• Check if some pipe is partially or totally strangled.
• Holes in water distributing pipe, situated in upper part of wet filter, are partially or totally
obstructed. Replace wet filter.
• Level sensors failed. Replace.
• Electrovalve failed. Replace.
• Check connections. Connect or replace.
• Replace.
• Repair causes leading to water inlet and replace module.
• Correct connection to battery and replace module.
• Check and seal again.
• Assemble kit nº 0912520023 available at Bergstrom.
TROUBLESHOOTING
Solution
IRIS EN
9
TU ESPACIO DE VIDA CONFORTABLE