EFOY ProEnergyCase 2020P-3 Bedienungsanleitung Seite 70

If you want to decommission the ProEnergyCase, please follow the checklist below.
For decommissioning the EFOY Pro fuel cell, please also observe the EFOY Pro fuel cell
operating instructions.
√
Required action

1) Switch off the consumer.

2) Open / unlock the EFOY ProEnergyCase.

3) Switch off the EFOY Pro fuel cell.

4) Turn off the main switch of the EFOY ProEnergyCase.

5) Disconnect the load.

6) Disconnect the solar module.

7) Disconnect the batteries.
8) Disconnect the charging cable and all data cables from the EFOY Pro

fuel cell.
9) Disconnect the exhaust hose. Protect it from contamination and

close the opening at the fuel cell with the protection cap.

10) Unscrew the fuel cartridge connections from the fuel cartridges

11) Close the EFOY fuel cartridges tightly with the cap.
12) Unscrew the fuel cartridge connector of the EFOY fuel cell from the

EFOY Fuel Manager and close the Fuel Manager with its cap.
13) Disconnect all cables from the EFOY Fuel Manager. Remove the

EFOY Fuel Manager from its fixing foam part and store it separately.
14) Detach the operating panel from the top-hat rail and store it

separately.
Page 70
Shutting down the ProEnergyCase