Werbung
Verfügbare Sprachen
Verfügbare Sprachen
For detailed information on the wiring of the power solution, please refer to
the enclosed wiring diagram.
Check the condition (age, state of charge) of your batteries before use. Also
check this condition regularly; after prolonged use, it may be advisable to
replace them.
When using two batteries (series or series connection), use batteries with the
same ageing status.
Only use batteries that fulfil specification regarding the use with the EFOY fuel cell.
Cut the foam to suit it to the size of the batteries.
Put in the batteries afterwards. Pay attention to the right positioning of the battery
terminals, so that they can be reached by the prepared power and sense line
afterwards.
+
-
12 V
Page 60
-
12 V
+
Connect the two batteries in series
to reach a voltage level of 24 V. To do
so, connect the plus pole of the first
battery to the minus pole of the
second battery. A bridge cable is
included in the accessory box of the
ProEnergyCase
Connect the prepared cables of the
ProEnergyCase to the batteries.
Plus and minus pole have two cable
each (one power line and one sense
line)
Commissioning
Werbung
