Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Commissioning
Only use batteries that fulfil specification regarding the use with the EFOY fuel cell.
Cut the foam to suit it to the battery size.
Put in the battery afterwards. Pay attention to the right positioning of the battery
terminals, so that they can be reached by the prepared power and sense line
afterwards.
rot
+
+
12 V
schwarz
-
-
12 V
If you want to use two batteries,
connect them in series to reach a
higher capacity at 12 V. To do so,
connect the two plus poles and the
two minus poles respectively.
Connect the prepared cables of the
ProEnergyCase to the battery. Plus
and minus pole have two cable each
(one power line and one sense line)
Only for using EFOY Li battery:
Additionally connect the two
communication cables. To do so,
remove the RJ12 coupling (position
marked in the image) and connect
the two plugs to the EFOY Li
communication plugs. Store the
coupling with the additional
accessories of the ProEnergyCase.
Page 59
Werbung
