Setup And Installation - Cameo ZENIT W600 Bedienungsanleitung

SETUP AND INSTALLATION

Thanks to the integrated plastic feet, the spotlight can be placed on a flat surface at a suitable lo-
cation. Mounting on a truss is done either by means of an omega bracket fixed in the centre of the
unit base (A), or by means of two omega brackets mounted at the outer fixing positions (B). Two
omega brackets are included in the delivery, suitable crossbar clamps are optionally available.
Ensure firm connections and secure the headlamp with a suitable safety rope at the designated
point (C).
The beam direction of the LED unit is adjusted independently of the unit base using the wing
screws on the side.
HAZARD: Overhead mounting requires extensive experience, including the calculation of
the limit values for load, the installation materials and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
B
C
A B
25