Cameo ZENIT W600 Bedienungsanleitung Seite 17

CONFIGURING STANDALONE MODE
Press MODE to access the device settings selection menu (--- Menu ---). Using the UP and DOWN
controls, select the menu item "Stand Alone" (observe arrow) and confirm with ENTER. In the sub-
menu you can now select from the standalone modes "Auto", "Colour Macro", "Static", "Tunable
White", "User Colour" and the timer function "Timer" using UP and DOWN. Confirm your selection
with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
AUTO MODE (programme 1 to programme 6)
The 6 different auto-programmes each comprise non-editable color-change sequences. Bright-
ness and speed are independently adjustable. Select auto mode as described above under
"CONFIGURE STANDALONE MODE" and confirm with ENTER. Now use UP and DOWN to select one
of the 6 auto programmes (observe arrow) and confirm with ENTER. To adjust brightness, use UP
and DOWN to select the menu item "Dim" and confirm with ENTER, then use UP and DOWN to
select the desired value between 000 and 255. Confirm by pressing ENTER. Set the run speed by
selecting the menu item "Speed", confirm with ENTER, and then select the desired value between
001 and 100. Confirm by pressing ENTER. Press MODE four times to return to the main display
(Mode Auto).
----------- Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
------------ Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
---------------- Auto ----------------
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
------------- Program x -------------
Dim <255>
Speed <100>
Dim Speed
000 001
- -
255 100
001
-
Mode
Auto
100
17