Cameo ZENIT W600 Bedienungsanleitung Seite 16

SET DMX START ADDRESS (DMX ADDRESS)
Press MODE to access the device settings selection menu (--- Menu ---). Use UP and DOWN to
select the menu item "DMX Address" (observe arrow) and confirm with ENTER. The display will
show a three-digit number field and you can use the UP and DOWN controls to configure the
desired DMX start address. Confirm with ENTER and press MODE to return to the main display (in
the example, "DMX address 001").
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
SET DMX MODE (DMX Mode)
Press MODE to access the device settings selection menu (--- Menu ---). Use UP and DOWN to
select the menu item "DMX Mode" (observe arrow) and confirm with ENTER. In the sub-menu,
you can now select between 9 different DMX operating modes with the UP and DOWN buttons.
Confirm your selection with ENTER. DMX tables with the channel assignments can be found in
these instructions under DMX CONTROL.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
16
001
-
DMX address
5xx
001
------------ DMX MODE ------------
15CH Full Access
10CH Full Access
8CH 8Bit
8CH User-Calibrated
6CH Factory-Calibrated
4CH User-Calibrated
3CH Factory-Calibrated
3CH Color Macro
2CH CCT Factory-Calib