Operation; Dmx Address - Cameo ZENIT W600 Bedienungsanleitung

NOTES: In order to provide protection from spraying water, in accordance with protection class
IP65, special IP65-rated XLR connectors must be used correctly with the DMX input and output
sockets, or they must be closed using the rubber sealing caps. When connected correctly, or
when sealed correctly with the rubber sealing caps, the POWER IN and POWER OUT sockets are
protected from spraying water, as in accordance with IP65.
PLEASE NOTE
As soon as the spotlight is correctly connected to the power supply, the following will be displayed
in succession during the starting process: "Welcome to Cameo", the model name and the soft-
ware version. After this process, the spotlight is ready for operation, and starts in the previously
enabled mode.
• If one of the DMX operating modes is activated and there is no DMX signal to the DMX input, the
currently programmed DMX address is displayed and the characters on the display will begin to
flash.
• After approximately 1 minute of inactivity, the display will automatically show the currently
active operating mode.
• Fast Access Feature: In order to simplify the menu guide, the device has an intelligent menu
structure that allows direct access to previously selected menu items and sub-menu items.
1. Press MODE and ENTER simultaneously for direct access to the last-edited sub-menu item,
where you can make changes instantly as required (DMX starting address and all modes).
2. Press MODE for direct access to the last-selected and last-edited menu item. Press ENTER
repeatedly to access the sub-menu items in order to change individual settings (DMX start-
ing address and all modes).
• Before changing device settings, ensure that the control panel is dry and dust free so that its
functionality is not impaired.
• The display can be rotated 180° by pressing UP when the main display is visible.

OPERATION

MAIN DISPLAY
After the power-up process, the spotlight is ready for operation, and starts in the previously
activated mode. The main display appears with the following information: current mode (in the
example DMX mode) and W-DMX™ status.
14
W-DMX™ status

DMX address

001
Current operating mode