Setup And Installation - Cameo OTOS H5 Bedienungsanleitung

SETUP AND INSTALLATION

Thanks to its integrated rubber feet, the lamp can be positioned in a suitable location on a level
surface. Traverse installation can be achieved with the help of two Omega brackets, which are
attached to the base of the device (A). 2 x Omega brackets are included. Suitable beam clamps
are available as an option. Ensure firm connections and secure the spotlight to the securing lug
(B) with a suitable safety cable.
HAZARD: Overhead mounting requires extensive experience, including the calculation of
the limit values for load, the installation materials and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
B
A
A
25