Operation - Cameo EVOS W7 Bedienungsanleitung

10 PAN LOCK
Mechanical locking device used to prevent the rotation of the head in the horizontal direction during transport. Disconnect the unit from the
mains, move the head parallel to the base (4 possible positions) and push the locking lever in the direction of the pan rotation axis to lock it
in position. Unlock the device before startup.
11 TILT LOCK
Mechanical locking device used to prevent the rotation of the head in the vertical direction during transport (5 possible positions). Discon-
nect the unit from the mains and slide the locking lever in the direction of the tilt rotation axis, moving the head of the unit vertically until
one of the 5 locking positions is found and the locking lever engages. Unlock the device before startup.

OPERATION

PLEASE NOTE
As soon as the spotlight is correctly connected to the power supply, the following will be displayed in succession: "Welcome to Cameo", the
model name and the software version. After this process, the lamp is ready for operation and starts in the previously enabled mode.
MAIN DISPLAY
The main display shows different information relevant to the various operating modes.
DMX and W-DMX operating modes
Temperature of the LED unit
030°C
001
87CH
DMX start address and DMX mode
030°C
Mode: Art-Net (sACN)
Universe:
IP: 192.168.000.150
DMX Address:
6
Main Menu
10
UNLOCK
W-DMX status
030°C
Operating mode and DMX mode
(Scene x)
!
030°C
87CH Mode:
0 Universe:
IP:
001 Main Address:
Pixel Address:
!
LOCK
030°C
Temperature of the LED unit
030°C
Mode: Art-Net
Mode
Universe
Universe:
Slave
IP address
IP:
DMX address
DMX Address:
!
Warning
Control
Art-Net (sACN)+DMX
0
Settings
192.168.000.150
Info
001
Service
001
!
Quick-Light
Control
LOCK
11
UNLOCK
001
87CH
Art-Net and sACN operating modes
W-DMX status
(sACN) 87CH
192.168.000.150
Main Menu
030°C
Mode: Kling-Net+DMX
Main Address:
Control Control
030°C
!
030°C
Mode:
0 Univers
IP:
001 Main A
Pixel A
!
DMX
W-DMX
001
Art-Ne
sACN
Art-Ne
sACN+
Kling-N
Slave
!
Scenes