Control Panel; Using The Controls - Elica Aria nuova Montage- Und Gebrauchsanweisungen

ELICA CONNECT
The hood features a Wi-Fi function for remote connection
via the Elica Connect App. Minimum system requirements:
• 2.4GHz Wi-Fi b/g/n wireless router • Android or iOs
Smartphone. Via the stores, check that the app is
compatible with the operating system your Smartphone is
running.
Note: The ELICA manufacturer declares that this model of
household appliance with WiFi module radio equipment
complies with Directive 2014/53/EU.
The radio equipment operates within the 2.4GHz ISM
frequency band, the maximum radio frequency power
transmitted does not exceed 20 dBm (e.i.r.p.).
Warnings:
• Data protection: The data that the connected device
detects is collected to allow for all the services of the
connected appliance to be used. Further information on
how the collected data is processed and on the privacy
policy is available at www.elica.com.
• Availability in different countries: The Elica Connect
service is available in specific countries. For further
information, see the
www.elica.com or check for availability from your
Smartphone store by searching for the Elica Connect App.
• Future changes: Elica reserves the right to make any
changes deemed useful to improve the Elica Connect
service. As a result, the descriptions contained in this
manual are not binding and should be treated as purely
indicative.
OPERATION

CONTROL PANEL

THINGS TO KNOW BEFORE STARTING
This product requires some preliminary operations before
being used:
●
NECESSARY OPERATION:
Radio Control pairing.
This product is designed to work with the Elica Radio
Control only. In order to be able to use this product, the
Radio Control must be paired.
Depending on the product purchased, you will find one of
dedicated section
the two Radio Controls shown in the figure:
Radio Control 1:
Radio Control 2:
The pairing instructions are given in the manual supplied
with the Radio Control.
When the Radio Control has been paired, both LEDs L1
and L2 on the hood will flash White.
Attention!: the main functions are indicated in the Radio
Control manual; the manual also contains other indications
of use and other functions with an explanation of how to
activate them using the Radio Control. In cases where no
at
reference is made to a specific Radio Control, the
indications are valid for both.
Note: The two Radio Controls are interchangeable, so it is
always possible to purchase the one not included with the
product from the store at www.elica.com.
●
OPTIONAL OPERATION:
Hob selection.
The product is designed to adapt its performance in the
best way possible according to the hob on which it works.
By Default, the product is set to work with GAS hobs.
To change this setting, after pairing the Radio Control, see
the chapter "Hob settings".
●
AUTOMATIC OPERATION:
VOC sensor calibration
If the optional hob selection operation is NOT performed,
the VOC sensor calibration starts automatically 2min.
after the product has been connected to the mains.
Calibration lasts 5 min. LED L1 flashes Green and
switches off at the end of the calibration procedure.
Please note! During calibration, the motor is switched
on at speed 1. For more details on the VOC sensor, refer
to the chapters dedicated to this function below.

USING THE CONTROLS

● Suction speed
This product is equipped with 5 suction speeds including 2
timed booster speeds:
Booster 1 (speed 4) timed 15 min.
Booster 2 (speed 5) timed 5 min.
After the minutes indicated above, the suction speed will go
back to speed 2 automatically.
11